Customer Service: (253) 677-0290
Decks Restore LLC builds, replaces, repairs and resurfaces decks for homeowners throughout Issaquah, Washington. We are a licensed and insured Washington contractor (WA LIC # CC DECKSRL797P2) with more than 25 years in the trade.
Our work on the Eastside covers new deck construction in wood and composite, deck resurfacing over sound framing, structural deck repair, pool deck resurfacing, porcelain pavers, motorized louvered roofs, acrylic patio covers and fencing. Every project starts with a free on-site measurement and a written quote.
A custom deck is one designed around how you actually intend to use the space. Before any drawing happens, we walk the property with you and ask what the deck is for. A deck built to seat twenty people for a summer barbecue is framed differently from a quiet morning platform off a primary bedroom, and both are framed differently from a deck carrying a hot tub.
That conversation sets the structure. Hot tubs and outdoor kitchens need concentrated load capacity designed in from the footings up, not added later. Multi-level decks need stair runs and landings that suit the grade instead of fighting it. These decisions are inexpensive at the planning stage and costly after framing is up.
Upgrades we are regularly asked to design in:
From new deck construction to resurfacing, repair and full outdoor living builds, every service below is delivered by our own crews under one Washington contractor registration.
New deck construction for Issaquah homes, from footings and framing through decking, railings and finish carpentry. We build in pressure-treated lumber, cedar and composite, and we size the structure for the loads your deck will actually carry.
A full deck replacement when the existing structure has reached the end of its service life. We remove the old deck, assess the ledger and footings, and rebuild to current Washington State Residential Code with proper flashing at the house connection.
Targeted repair and board replacement for Issaquah decks that are structurally sound but showing wear. Resurfacing keeps the existing frame, replaces the walking surface and railings, and costs well below a full rebuild.
Comprehensive restoration for decks with both structural and surface problems. We correct framing defects, replace compromised members, renew the deck surface and bring the whole assembly back to safe working condition.
Custom front and back porch construction for Issaquah homes, designed to match the existing rooflines and siding so the addition reads as original rather than bolted on.
Trex, Deckorators and TimberTech composite decking installed by a crew that works with these systems regularly. Composite handles the Puget Sound wet season without the annual sanding, staining and sealing cycle that cedar demands.
Motorized louvered roof systems for Issaquah patios, decks, outdoor kitchens and spa areas. Adjustable aluminum louvers rotate open for sun and close into a sealed roof when the rain starts, with an integrated gutter system carrying water away. Available in white, beige, bronze and custom colors, freestanding or attached, with options for fans, lighting, retractable screens and smartphone control.
Acrylic patio covers that block UV and weather without blocking daylight, which matters during an Issaquah winter. Sunspace acrylic panels hold 90 percent light transmission and clarity for 30 years and carry a 30-year warranty against yellowing. Non-shattering, engineered for heavy snow loads and fitted with an extruded aluminum gutter system.
Porcelain paver installation for Issaquah decks, patios, rooftops, walkways and pool surrounds. Our 2 cm porcelain tiles are non-porous, slip resistant and immune to the warping, rot and staining that affect wood. Finishes include natural stone, concrete, terrazzo and wood-look textures.
Residential and commercial fencing for Issaquah properties, from standard cedar privacy fencing to custom designs and tall solid screens. We handle repairs to existing fences as well as full replacement, with free in-person consultations before any work is quoted.
Composite decking is the most common request we get on the Eastside, and the climate explains why. Issaquah sits in a wet maritime zone where decks stay damp for long stretches of the year. Wood in that environment grows moss and algae on the north-facing side, cups where water sits, and needs refinishing on a schedule most homeowners abandon by year three.
Composite boards are manufactured from wood-plastic blends or fully synthetic material and are capped on the exposed faces. They do not absorb water the way lumber does, so they resist warping, splitting and insect damage. They do not splinter underfoot, which is the reason families with small children and dogs tend to specify them. Manufacturers warranty them for 25 to 30 years, and a composite deck commonly reaches 25 to 50 years of service against 10 to 20 for softwood.
One structural note that gets missed: composite boards weigh more than cedar, and on some existing frames that extra dead load requires additional joists or supplementary posts before the new surface goes down. We check framing capacity before we quote a composite resurface, not after.
Wood still wins on two counts. It costs less upfront, and nothing replicates the grain and smell of real cedar. For homeowners who want a natural deck and accept the maintenance that comes with it, we build in pressure-treated lumber and in western red cedar.
The maintenance is real and worth stating plainly. A wood deck in Issaquah needs cleaning and refinishing roughly every two years to hold its appearance and shed water. Skipped maintenance shows up as greying, surface checking, cupped boards and eventually soft spots around fasteners. Budget somewhere near $1,200 per maintenance cycle and the arithmetic starts to favor composite within about a decade.
Where wood makes clear sense: framing, which is almost always pressure-treated lumber regardless of what the surface is; posts, beams and skirting; privacy screens; and deck surfaces for homeowners who genuinely enjoy the refinishing ritual. We will tell you which parts of your project should be wood and which should not.
Sticker price answers only part of the question. Here is how the two materials compare across the life of the deck.
| Composite Decking | Conventional Wood Decking | |
|---|---|---|
| Durability | Resists weather, moisture, insects, splitting and warping | Vulnerable to moisture damage, insects, splitting and warping |
| Maintenance | Washing only. No sanding, staining or sealing | Cleaning and refinishing roughly every two years |
| Appearance | Consistent color across the deck, with textures that read as real wood | Natural grain that greys without regular care |
| Safety | Splinter free, scratch resistant and slip resistant | Can splinter, rot and attract insects |
| Environmental Impact | Manufactured from recycled and sustainable material | Maintenance involves repeated chemical stains and sealants |
| Lifespan | 25 to 50 years | 10 to 20 years |
| Warranty | 25 to 30 years from the manufacturer | Not applicable to the deck surface |
Over the life of the deck the two materials separate in four places.
Labor is effectively identical between the two. A crew spends the same hours framing, cutting and fastening whether the board is cedar or composite. The difference is material, and composite boards typically run three to four times the cost of standard lumber.
Deckorators and TimberTech manufacture from engineered wood-plastic blends and synthetic compounds built to handle moisture cycling and temperature swings. Warranties of 25 to 30 years reflect that engineering, and for the Puget Sound climate the engineering is the point.
Put $1,200 against wood maintenance every other cycle and the cheaper deck steadily closes the gap. There is also the part nobody puts in a spreadsheet: a wood deck looks worse every year, while a composite deck looks roughly the same in year twelve as in year two.
Wood decks lose value quickly after installation. Both materials return something on a home sale, but composite holds its appearance and structure, so it presents better to a buyer walking the backyard during an inspection.
Deck repair addresses specific failures without rebuilding the whole structure. Most Issaquah repair calls involve one of a short list of problems: rot where the ledger board meets the house, failing or undersized footings, loose railings, split or cupped surface boards, corroded fasteners, or stair stringers that have softened at the bottom tread.
The ledger connection deserves particular attention. It is the single most common point of deck failure, and in our climate the cause is almost always water getting behind improper or missing flashing and sitting against the rim joist. We open the connection, assess the condition of the framing behind it, and reflash correctly. A repair that skips this step and only replaces visible boards is cosmetic.
Our repair work begins with a structural assessment, not a quote. We inspect footings, posts, beams, joists, the ledger, railings and stairs, then tell you what has to be fixed for safety, what should be addressed this season, and what can wait. Some decks we recommend repairing. Some we recommend replacing, and we will say so even though replacement is a larger job, because a deck with compromised framing is a liability.
Deck resurfacing replaces the walking surface and railings while keeping the existing frame. It suits decks where the structure is sound but the surface has weathered past the point where refinishing helps.
The work runs in sequence. We strip the old decking, expose the joists, and inspect every framing member. Compromised joists get sisters or replacement. Fasteners get upgraded. Flashing gets corrected if it was wrong. Only then does the new surface go down, and most homeowners use that opportunity to move from wood to composite.
Resurfacing costs substantially less than a full rebuild because the expensive structural work is already in place. It is also the natural moment to add features that are awkward to retrofit later: integrated lighting, new railing systems, built-in benches, planter boxes, or a connection point for a future louvered roof.
What resurfacing cannot do is fix a bad frame. If the footings are undersized, the posts are rotted, or the ledger has failed, the deck needs rebuilding. We tell you which situation you are in after we see the framing, and that assessment is part of the free quote.
Pool deck resurfacing renews the surface around a pool or spa while keeping the existing substrate. The requirements differ from a standard deck, because a pool surround deals with constant moisture, chlorinated or salt-treated water, bare feet and reflected heat.
Two factors govern the specification. The first is slip resistance, which has to hold up when the surface is wet, not just when a sample feels textured in a showroom. The second is thermal comfort, because a surface that absorbs heat becomes unusable barefoot during an Issaquah August.
We resurface pool decks in porcelain pavers and in composite. Porcelain is the stronger choice for most pool surrounds: the 2 cm tiles are non-porous, so pool chemicals and standing water do not penetrate, and they are available in slip-resistant finishes that mimic natural stone or wood. Composite works well for raised pool decks and spa platforms where a wood-look surface over a framed structure is preferred.
Spa and sauna decks fall under the same category of work. These need concentrated load capacity, drainage detailing and a surface that tolerates repeated wetting, and we design all three into the quote.
Choosing between deck contractors in Issaquah gets easier when you know which questions separate them. Four come up constantly on Eastside projects.
Decks above a set height from grade require a building permit in Washington, and the threshold is low enough that most elevated Issaquah decks need one. Applications in this area frequently require engineering documentation and scaled project drawings. Plenty of contractors avoid permitted work entirely because of the paperwork. We do not, and we work directly with the city rather than leaving the homeowner to chase approvals. Confirm current requirements with the City of Issaquah Permit Center.
A large share of Issaquah properties sit on grade. Hillside lots near Squak Mountain, Cougar Mountain and Tiger Mountain can fall under critical area and steep slope regulations that affect what can be built and how footings must be designed. A deck twelve feet off grade on a slope is an engineered structure, and it should be quoted as one.
Everything above is secondary to keeping water out of the framing. Correct ledger flashing, joist tape over the top of every joist, adequate drainage below the deck, and proper gapping between boards determine whether the structure lasts thirty years or fifteen. These details add modest cost and are invisible when finished, which is why they are the first items cut from a low bid.
Neighborhoods including Issaquah Highlands and Klahanie operate design review processes with their own standards for railing style, color and material. We build to those standards where they apply, and we prepare the submittal documentation your association asks for.
Decks Restore has been building in Washington for more than 25 years. Our Google rating is 5.0 across 34 reviews, and the themes in those reviews are consistent: estimates delivered quickly, projects finished on schedule, and crews who respect the property they are working on.
Someone comes out, measures, looks at your framing and grade, and prices the actual job. Quotes are written, discussed before acceptance, and fixed once approved.
Multiple clients have had someone out the same day they called and a written number within two days.
Several of our deck projects have gone from demolition to completion in roughly a week. Larger and permitted builds take longer, and you get the real timeline before you sign rather than an optimistic one.
Sometimes the right recommendation costs us money. Clients have noted that we steered them toward products that prevent warping and water pooling rather than toward the most expensive option on the shelf.
That includes permitted work requiring engineering, and projects abandoned mid-build by a previous contractor.
Financing is available through HFS Financial if you would rather spread the cost across the project rather than pay in full on completion.
A sample of decks we have rebuilt and resurfaced across the Puget Sound region.
Call (253) 677-0290 or submit the quote form. We schedule an on-site appointment, usually quickly, and in many cases the same day you reach out.
We measure, assess the site and send a written quote covering scope, materials and timeline. You review it and ask questions before anything is agreed. No work starts until you accept, and the number does not move afterward.
We walk you through decking material, railing style, board layout, lighting and finish details, and we bring physical samples so you are choosing from the real thing rather than a photograph. If the project needs a permit, we handle the application and the drawings.
Our crew builds the deck. You get a completion walkthrough, and we address anything that is not right before we call the job finished.
A search for “deck builder near me” from an Issaquah address returns contractors Google believes serve your location and can reach you. Two things usually matter more than the ranking order.
A company that services Issaquah occasionally from forty miles out will be slower to respond on a warranty call than one with crews on the Eastside every week. We work across Issaquah, Sammamish, Bellevue, Renton, Newcastle, Mercer Island, Redmond and Maple Valley continuously.
Washington requires contractors to be registered, bonded and insured. Our registration number is CC DECKSRL797P2, and you can verify it through the Washington State Department of Labor and Industries contractor lookup before you let anyone on your property. Do this for every bid you collect, not only ours.
If you are comparing deck builders near me in Issaquah, ask each one for their L&I number, proof of insurance, a written scope, and whether their quote includes permitting. The answers tend to sort the list quickly.
We build throughout Issaquah, including the Issaquah Highlands, Talus, Olde Town, Squak Mountain, Providence Point, Montreux and Klahanie, across the 98027 and 98029 ZIP codes. Select your city below for local project details.
Cost depends on size, height above grade, material and whether the project requires a permit and engineering. Labor is comparable between wood and composite; the material is where the difference sits, with composite boards running roughly three to four times the cost of standard lumber. We provide a written quote after an on-site measurement, at no charge.
Decks above a set height from grade require a building permit in Washington, and most elevated decks meet that threshold. Permit submittals in this area often require engineering documentation and scaled drawings. We handle the permit process for our clients. Confirm current requirements with the City of Issaquah Permit Center.
Several of our deck projects have run from demolition to completion in about a week. Larger builds, multi-level decks and permitted projects take longer, and permit review time is outside our control. We give you a realistic timeline with the quote.
For most Issaquah homeowners, yes. Composite does not require the two-year refinishing cycle wood needs, resists the moss and moisture problems common in this climate, carries a 25 to 30 year manufacturer warranty, and typically lasts 25 to 50 years against 10 to 20 for wood. Wood remains the better choice if upfront cost is the deciding factor or you specifically want natural cedar.
Repair suits decks with isolated problems and sound structure. Resurfacing suits decks where the frame is good but the surface has failed; it replaces the decking and railings over the existing structure at well below rebuild cost. Replacement is necessary when footings, posts or the ledger are compromised. We tell you which applies after inspecting the framing, and that assessment is part of the free quote.
Yes. We resurface pool decks and spa surrounds in porcelain pavers and composite. Porcelain is usually the better specification around water because the 2 cm tiles are non-porous and available in slip-resistant finishes, so pool chemicals and standing water do not penetrate the surface.
Yes. Decks Restore LLC holds Washington contractor registration CC DECKSRL797P2 and carries insurance. You can verify any Washington contractor through the Department of Labor and Industries lookup.
Issaquah, Sammamish, Bellevue, Mercer Island, Renton, Newcastle, Redmond, Maple Valley, Kent, Covington, Auburn, Federal Way, Tacoma, Gig Harbor, Puyallup, Des Moines, Bonney Lake and Seattle.
Yes, through HFS Financial. You can apply online from our financing page.
Yes. We install motorized louvered roof systems, acrylic patio covers, porcelain deck pavers, porches and fencing, and we handle general contracting work related to outdoor living space.
Free on-site measurement, a written quote before any work begins, and a price that does not move after you accept it.